Secondary links

Custom Search 1

AVE Touch 1 channel transmitter

The 442ABTC1 device is a single-channel bus transmitter with Ave Touch technology which can control all the receivers of the AVEbus family by simply touching the glass plate.

According to the operating mode assigned, the most suitable push- button (with central fulcrum or asymmetric) can be installed frontally.

Technical data
• Enclosure: 1 S.44 “hidden module (22.5 w x 45 h x 46.5 d) mm to complete with a glass plate. • Protection degree: IP41 if completed with plate and installed in the corresponding flush-mounting support.
• Reference temperature and relative humidity: 25°C RH 65%
• Operating amb. temp. range: -10°C to +50°C • Maximum Relative Humidity: 90% at 35°C
• Max. Height: 2000 m a.s.l.
• Auxiliary power supply
    Voltage rating: 12Vac/dc
    Allowed variation: 10.5V ÷ 14V
    Electrical input at 12Vdc: 6.6 mA MAX
    Electrical input at 12Vac: 12 mA MAX
• Possibility to set the operating sensitivity of the device: when touching the plate or at 4 mm from the plate
• Temporary inhibition for cleaning the plate
• By a slight touch of the finger on the entire front side of the device, a command message is sent and the status of the associated receiver is signal-led
• Front LED for identification in the dark:

By putting a hand closer, the LED sends a stronger light.
Note: if the led light is dazzling, it is recommended that the blue label contained in the set code ETI16 is applied on the device front side (back of plate).

• Terminal 1: BUS positive
• Terminal 2: BUS GND
• Terminal 3: auxiliary power supply positive
• Terminal 4: auxiliary power supply GND

home automation installation steps